HIGH PERFORMANCE STAGE 3 HYBRID TURBO UNIT FOR F55, F56 COOPER S AND JCW, GP 400BHP+
- Capable of 400+ bhp
- Improved Spool and Boost speeds Due to Performance Billet compressor Wheel
- Will Push far Higher Air Volume over Stock
- Suitable for Heavily Modified or Lightly Modified B48 Engines
- Bolt On performance solution
If your looking for some straight up bolt on power that's been tested and adapted specifically for the Turbo Gen 3 B48 Engine mini, with out any need to re map and a solution that works straight out of the box then our PRS racing Hybrid turbo unit for the gen 3 mini is the perfect solution.
We use a brand New GENUINE manufactured turbo unit and then remove the standard internals to allow for carefully selected, larger, higher performing components. The internals are machined out to allow for superior flow and increased volume through out the housing. We then install brand new high performing motorsport grade components to replace the inferior low performing stock internals.
We have carefully developed this turbo to allow for a increased compressor and turbine wheels using a 6 blade compressor wheel with a unique blade pitch to ensure that the spool time and drag is efficient as we can get it.
The main brief when designing this turbo was to ensure, increased throttle response with minimal lag and to get rid of any flat spots though out the full rev range in any gear,
After the huge success and performance that we have seen with our R56 Hybrid turbo we wanted to follow suit and ensure we achieved the same results if not better, with our Gen 3 Hybrid performance turbo unit.
47.04mm Inducer - (Stock Turbo 43.1mm)
58.00mm Exducer - (Stock Turbo 56.00mm)
Hybrid Turbine Wheel Upgrade Spec
52.3mm/45.6mm 9 Blade Upgraded Turbine wheel - (Stock 47.0mm/41.2mm 11 Blade)
- Machined Housing increasing volume
- Upgraded 360 Thrust Bearing
