WHY UPGRADE YOUR JCW OR STOCK R56 COOPER S TURBO TO A HIGH PERFORMANCE HYBRID TURBO ?
- Improved Throttle Response and mid to high end rev range Performance
- Improved Boost and Spool Speeds
- Push Much larger Volumes of air over stock Turbo
- Will fit both JCW and Non JCW Engines N14 , N18
- Suitable for heavily modified, stock or slightly modified Engines
- Capable of 350 BHP
- Bolts on without need for modified Exhaust manifold
THE BMW MINI R56 HYBRID HIGH PERFORMANCE TURBO UPGRADE SPEC
Hybrid Compressor Wheel Upgrade
- 7 Blade Compressor Wheel with Tail Profile
- 42mm Inducer - Stock Turbo Non JCW (37.8 Inducer) JCW Turbo - (41mm Inducer)
- 56mm Exducer - Stock Turbo Non JCW (53.8mm Exducer) JCW Turbo - (54mm Exducer)
Hybrid Turbine Wheel Upgrade
- 50.00mm Upgraded Turbine wheel - (Stock 44.9mm)
- Cut Back Turbine Wheel
- Machined Housing increasing volume
- Upgraded 360 Thrust Bearing
- Safe Up to 22 - 24 PSI
- Capable of 2 Bar of Boost
If you are looking for more power, greater air flow and a much more responsive throttle, then the STAGE 3 hybrid turbo upgrade for the R56 cooper s turbo N14 and N18 is for you. With the far superior 7 blade compressor wheel the turbo will spool much quicker than the stock OEM and JCW mini turbos.
Current trends are seeing the use of 11 and 12 Blade compressor wheels but these wheels actually require ported shroud covers for them to work correctly. The borg warner turbos do not use ported shroud covers, hence the 11 and 12 blade compressor wheels are wasted.
Our Hybrid turbo has been specifically designed to ensure the very most in terms of performance and throttle response as well as making vast performance in the mid and top range.
When combined with a Re map the hybrid turbo can open up some of the power potential that the R56 has to offer.
With a high flow cat and exhaust the power form the R56 can really come into its own allowing increased air into the engine along with exiting gasses flowing as freely as possible.
The STAGE 3 hybrid turbo combined with opening up the intake restriction within the cylinder head, a good valve job, exhaust system and re-map has seen over 350BHP at the wheel.
The key to good power in a turbo car is in the turbo!
FULL fitting Kit Included - Exhaust outlet gasket, exhaust inlet gasket and studs and nuts
